XFX has quietly introduced its first new custom Radeon RX Vega 56 and RX Vega 64 video card designs. The custom Radeon RX Vega Double Edition graphics adapters from XFX are not factory overclocked, but have an improved cooling system featuring two fans that may enable a higher overclocking potential when compared to regular air-cooled boards based on AMD’s Vega GPU.

When AMD released its reference Radeon RX Vega 64 and Radeon RX Vega 56 graphics cards earlier this year, the company surprised reviewers and enthusiasts with rather long PCBs (when compared to the Radeon R9 Fury X products) that had a lot of empty space. As it turned out, the RX Vega-series boards need a good cooling and thus a relatively large heatsink. As a result, the company decided to go with a long half-empty PCB to simplify auxiliary PCIe power cable management for end users. As for VRMs, AMD’s reference cards feature a 6+1 phase VRM based on the International Rectifier IR35217 power controller with six IR 3598 phase doublers for the GPU power circuity to maximize efficiency.

XFX decided to change design ideology of its custom Radeon RX Vega-based products when compared to AMD’s reference cards. The company’s Radeon RX Vega 56 Double Edition (RX-VEGALDFF6) and Radeon RX Vega 64 (RX-VEGATDFF6) Double Edition graphics cards rely on a notably shorter PCB that is just 153 mm long, and the cards are also equipped with an even larger cooling system when compared to AMD's reference cards (more about the cooling system later later). XFX says it uses a VRM with 6+1 phases for its graphics cards based on the Vega GPU, but it is unknown whether the company also installs phase doublers. The XFX Radeon RX Vega Double Edition cards have two 8-pin auxiliary PCIe power connectors that are located on the top right corner of the PCB. Given the large cooler, power connectors are placed in the center of the card, which will not simplify cable management.

Overall, the cooler the company uses for its custom Vega-based offerings resembles coolers it uses on the Radeon RX 500-series. It features two large aluminum heatsinks with tens of thin fins, a special copper plate that covers GPU+HBM2 package as well as VRM, five or more heat pipes that take away heat from the two aforementioned components, and two fans. A plastic shroud on the front covers the cooling system, whereas the other side of the card is covered by a backplate.

The heatsink used by XFX for its Radeon RX Vega Double Edition video cards has a 75% larger surface area than AMD’s reference one, according to XFX. Meanwhile, as this is an open-air cooler design, it comes with the usual tradeoffs relative to the blower-based reference cooler: potentially better cooling and lower noise thanks to the two fans, but at a cost of recycling most of the heat generated from the card back into the case. By equipping its custom Radeon RX Vega 56 Double Edition and Radeon RX Vega 64 Double Edition with its own coolers, XFX clearly wants them to stand out from the rest of the Vega camp in terms of noise and overclocking potential. At least initially, custom Vega-based boards from XFX will only be offered with reference clocks, so overclocking potential will be one of their key selling points.

XFX has not disclosed MSRPs of its Radeon RX Vega 56 Double Edition and Radeon RX Vega 64 Double Edition graphics cards, but we are told to expect them to close to AMD's MSRPs for similar boards. Meanwhile, the burning question of when these custom cards will be available hasn't been precisely answered, but XFX has narrowed the window some, as the company has stated that they hope to put their custom cards on store shelves before Christmas. At press time, the products were listed on the company’s website meaning that they can hit the market anytime now.

As for real-world pricing, given the cryptocurrency mining frenzy and the holiday season, virtually all graphics cards are sold at prices above their MSRPs, so it is not a good business to make any predictions here. Besides, it is also unclear whether AMD’s recently launched Prey and Wolfenstein II bundling campaign covers XFX’s custom Radeon RX Vega adapters.

Related Reading:

Source: XFX

Comments Locked

21 Comments

View All Comments

  • LauRoman - Tuesday, November 28, 2017 - link

    Bad design is thataway ><>
    or this way <><
  • austinsguitar - Tuesday, November 28, 2017 - link

    no its this way ^...
  • ddriver - Tuesday, November 28, 2017 - link

    The holes in the back are actually a good move engineering wise, it will definitely improve cooling performance.
  • Azix - Tuesday, November 28, 2017 - link

    Yeah, sucks for the CPU and RAM tho
  • 0ldman79 - Friday, December 1, 2017 - link

    That should be an intake beside the CPU and RAM.

    Shouldn't hurt it.
  • chrnochime - Tuesday, November 28, 2017 - link

    If for nothing else there's less material used for the fan shroud. Questionable aesthetics yes but at least there's less plastic created.
  • PeachNCream - Tuesday, November 28, 2017 - link

    It looks like that heatsink design will allow one of the fans to blow waste GPU heat into the CPU/RAM area of the motherboard. That doesn't seem like a good idea.
  • ddriver - Tuesday, November 28, 2017 - link

    It really depends on the case airflow, but in general, and considering that gpus usually get much hotter, I'd say this is actually better than blasting the air into the pc or diverting it to come out the side, from where it will most likely reach the cpu air stream nontheless.
  • e36Jeff - Tuesday, November 28, 2017 - link

    anything that's not a blower fan is dumping its waste heat into the case, and given that most cases flow air front to back and heat rises, regardless of how you are dumping it(through the back of the card or out the end) it's going into the area above it, which is usually where the CPU lives. If you have decent airflow, it's a non-issue as it will get pushed out the back of the case before it really does much to heat the CPU area.
  • MrSpadge - Tuesday, November 28, 2017 - link

    This actually one of the best open air cooling designs. It allows the "back fan" to blow freely through the fins rather than against the PCB, which reduces the resistance to the air flow significantly. Hence the cooler can perform better or be more silent. And venting more heat straight into the CPU area is generally a good thing, as this area is usually the best vented one. There has been a Fury with a conceptually similar design, I think from Gigabyte, with far superior thermal & acoustic performance.

Log in

Don't have an account? Sign up now