Comments Locked

19 Comments

Back to Article

  • max347 - Wednesday, January 23, 2013 - link

    Second paragraph, second sentence, seen->see*?
  • SunLord - Wednesday, January 23, 2013 - link

    You know what I would like to see in case reviews photos of the case with different size motherboards. I don't care about them testing the case with all the different sizes but it would be nice to see what a Full ATX and an E-ATX would look like installed in the cases that support them using a MicroATX MB is nice for a constant variable in testing across all cases but gives you zero clue on how well a motherboard you would actually use in this case would fit or look
  • Sabresiberian - Wednesday, January 23, 2013 - link

    I agree here. I understand the reson to stick with one size mainboard for all testing, but I'm very skeptical of the clams of some of these case manufacturers when they say their case will hold "XL-ATX" and "E-ATX". Get one of those EVGA SR-2s and slap that baby in there, heh.
  • Sabresiberian - Wednesday, January 23, 2013 - link

    reason*; claims*. Sheesh, my error checker was way on the blink on this post.
  • Barbarossa - Monday, January 28, 2013 - link

    The SR-2 is HPTX, most cases don't claim compatibility with that.

    By E-ATX most people mean a Rampage or Maximus board from Asus or similar, which isn't actually the same as the TRUE E-ATX spec.

    XL-ATX is kind of a made-up spec, but it was used to define longer than standard boards (more than 8 slots).
  • ForeverAlone - Wednesday, January 23, 2013 - link

    It's nice to see that twin-120mm fans on the front are standard now.
  • number58 - Wednesday, January 23, 2013 - link

    I noticed that the numbers from the recently reviewed phantom 630 were not in the tables to compare with this case. Any particular reason?
  • vol7ron - Wednesday, January 23, 2013 - link

    Not sure this would have much of an impact on results, but do you take ambient temperature before/during (maybe even after) tests?
  • pensive69 - Wednesday, January 23, 2013 - link

    how about a marriage between a small home or dorm room fridge maker and a case maker? you'd be able to do your install INSIDE an actual fridge with insulation and temp controls provided in a system designed to work at 35 - 45 F anyway?
    ambient air solutions start around 30 - 40 F higher out of the box
  • Beenthere - Wednesday, January 23, 2013 - link

    Some of the PC case makers seem to have lost the plot...

    There is a reason why the original tower PC cases were built the way they were with no openings in the top of the case. Here's a hint: what blows out can also fall in...

    While in theory an open top allows warm air to escape easily, it also allows dirt/dust/liquids/small objects, etc. to enter - even when unintended or unwanted. Thus top openings in PC cases are a bad idea on several fronts including NOISE, for those who don't already know.

    As far as buying this Rosewill case based on it's "thermal headroom", that is a sick joke. It hardly matters if your OC'd CPU runs at 49C or 51C as either is well within the low end of the operating range for ANY CPU. Hell 59C isn't even an issue.

    With all of the disadvantages to this case design be it the top opening, which being raised is REALLY bad, the noise, the shoddy construction, the excessive fan noise, the screened side panel and the excessive price, this unit can hardly be recommended for anyone with a clue. Yes some folks will buy it for it's "stealthy" look or it's pretty LEDs but not anyone with a clue, especially when you can buy a quality conventional PC casr for ~$70.

    It's actually quite silly what the PC case market has become in recent years to entice the 13 year old kids. I'm surprised they aren't selling PC cases with tit and arse plastered on the outside of them - aka Lara Croft/Anjie Jolie, like they do GPU cards. Those would fly out the door faster than they could produce them. The 13 year old kids could have their favorite fantasy babe half naked sprawling all over the outside of their PC case. Oh baby, I can't wait for these...soon to be on shelves no doubt. :(
  • 1d107 - Thursday, January 24, 2013 - link

    Completely agree. In older days I tested an Antec P-180 with a 130W Core-i7 and didn't find any advantages of having the top fan. And now, when CPUs have lower TDPs, this becomes even less relevant.

    But, mot of all, this case looks plain ugly on the outside. Look at all those unused mounting holes on the side panel. Even the most hidden corner of my closet doesn't deserve this.
  • Galatian - Thursday, January 24, 2013 - link

    Actually you are missing the point of the opening. It is (at least for some persons) the best spot to put in the radiator in their water cooling loop. And I believe people who buy cases with as many fan screw holes as this are usually the market demography this case is designed for. A complete silent freak (who doesn't use watercooling) will probably just get a smaller case with noise insulation.
  • WeaselITB - Wednesday, January 23, 2013 - link

    I don't understand the slight against this case (and others) for lack of a fan controller. Sure, back in the day when motherboards had 1 fan plug for your CPU (if you were lucky), I could understand, but doesn't everyone just plug the fans into the motherboard and let the automatic thermal monitoring control them? It seems odd to ding the case for not including a fan controller, but then ding the motherboard for not having enough fan plugs on the board (which has happened in other reviews).

    Which is it?

    -Weasel
  • chaos215bar2 - Wednesday, January 23, 2013 - link

    This is pretty much what I thought. I have no interest in a manual fan controller, builtin or otherwise. The inclusion of one is actually a drawback, since it wastes space with controls that I don't want or need.

    There's definitely room for a case to do something really innovative in this area, but until that happens, I'll either use the motherboard's builtin thermal controls or, if there aren't enough headers, I'll use one of the various third party options. That way I end up with a system that doesn't need any manual intervention for thermal control and has exactly the features and behavior that I want.
  • Onus - Wednesday, January 23, 2013 - link

    I also agree with this. Furthermore, sometimes proprietary fans are used, for example Antec's, with the HL (or HML) switches.
    Although I've been satisfied with all of the Rosewill cases I've used so far, that top fan problem looks like a dealbreaker on this one.
  • dtolios - Wednesday, January 23, 2013 - link

    I agree that the manual fun controller is kinda outdated. I would prefer a smart placed pwm splitter with aux power supplied directly through the psu. Long cabling and sharing a "fan xpert" or equiv smart fan header with more than one fan is more than enough. Imho
  • ezekiel68 - Thursday, January 24, 2013 - link

    It's good that you pointed out the top grommet flaw, but I'm not sure it's fatal. Most radiator designs have the screws pointing into the case with the screw heads on the exterior. Knowing the grommets could come loose, a simple set of four (slightly) larger black washers could be used to ensure a cooling unit would not fall in.

    Should this be necessary? No, of course not. Rosewill should certainly address the issue. But, given the other pluses of the case, it's worth noting there is an easy work-around.
  • ol1bit - Friday, January 25, 2013 - link

    Wow,

    I must have missed that info in the past. Interesting it is a New Egg brand.
  • Mike89 - Friday, September 13, 2013 - link

    Looks like a pretty nice case to me. The way the sides connect are no issue to me, I've had a lot of them and they are no problem to open and close (I think the reviewer made too big a deal out of that). What's attractive to me is the extended side and top for more room inside the case and I think it looks good. Another really good thing is all fan's are included. You hardly ever see that in any case even the expensive ones. Adding a fan controller would be a cheap and easy thing to do here. The price is about $100 now so I think it's a pretty good deal. I think the reviewer should spend less time on cooling comparisons and more on the case itself. This review didn't even pop off the front to show the fans. I personally could care less about cooling comparisons and skip them when I'm reading about a case. I mean with front, rear, side and top fans I already know what the airflow and cooling is going to be like. Thought this review could have been more thorough.

Log in

Don't have an account? Sign up now