Comments Locked

16 Comments

Back to Article

  • flyingpants265 - Thursday, February 27, 2020 - link

    RTX 2600!
  • mischlep - Thursday, February 27, 2020 - link

    There is also an RTX2080 version available.
    https://www.anandtech.com/show/15414/ces-2020-zota...
  • ingwe - Thursday, February 27, 2020 - link

    I think the poster was just commenting on a typo. It should be 2060 not 2600.
  • Slash3 - Thursday, February 27, 2020 - link

    And forever "GeForce RTX 2600" it shall remain.
  • PeachNCream - Thursday, February 27, 2020 - link

    Pity about the wireless adapter, but it can probably be swapped out with something else so there is that.
  • timecop1818 - Thursday, February 27, 2020 - link

    I never understood why desktops need wireless at all. I have never bought a motherboard with wireless and don't plan to but it seems all GaMeR shit comes with some kinda WiFi these days.
  • nonig - Friday, February 28, 2020 - link

    Can't answer on behalf of everybody - obviously - but for me, it has proven to be quite practical in the living room when playing VR. My desktop is connected via ethernet in the office where it usually lives. But when I move it to the living room I don't have to drag a LAN cable across the house.
    For streaming, authenticating, logging into Steam/Origin it's sufficient. For other people, I guess it's just the convenience of not having to bother with another cable when WiFi is good enough for their needs or when looks/clean-ness matters more.
  • damianrobertjones - Friday, February 28, 2020 - link

    My Nuc is next to the TV in my living room. Wireless is required.
  • sweenish - Friday, February 28, 2020 - link

    How narrow your worldview must be that you can't conceive of any possible reasons for something as simple as a WiFi connected computer.
  • nonig - Monday, March 2, 2020 - link

    Now now there, sweenish. That's why we try to educate.
  • Dug - Monday, March 2, 2020 - link

    Do you realize this is portable? Do you realize people use portable devices besides sitting at a desk.
    Do you realize that 90% of households don't have an Ethernet port located in the room their computer is, and can't put one in because they are in an apartment, rented house, or other reasons?
    People care more about having wireless than Ethernet because it works, and solves a problem. But I guess you are right, wireless is just GaMeR shit?
    Now if I could only find an Ethernet adapter for my phone.
  • AdditionalPylons - Thursday, February 27, 2020 - link

    Finally multi-gigabit ethernet is starting to show up, but it's sad it's taking so long. I guess most vendors don't care, and people with a faster-than-1Gbps-NAS is still rare, internet connection even rarer. But seeing as the controllers are less than $5 (e.g. the Intel i225-V is $2.4 according to https://www.servethehome.com/current-intel-i225-2-... ) it would be a nice differentiator and would definitely help making the product feel more future-proof.

    And Anton, could perhaps please add the "Nbase-T" tag on top so that gear with this is easier to find on your site?
  • azazel1024 - Thursday, February 27, 2020 - link

    IMHO switch support at a reasonable cost is the biggest issue. Which I don't get if 2.5GbE is coming at a cost of less than $5 a port for an INTEL chip and Realtek is probably a little cheaper. I realize it is ~$50 for a retail single port card, but more components as well as profits, etc. factoring in there. Power budget also seems roughly as low for a 2.5GbE port now as a 1GbE port was 5-6 years ago (if not better). So active cooling and PSU aren't a concern.

    Seems like you could roll 5, 8, 16, 24 and 48 port 2.5GbE switches at reasonable prices. I realize there is more than just the actual network adapter costs to a switch since it has to handle the actual flow from each port, switch controller, memory, management interface for semi-managed, L2 and L3 switches, etc. Lots more than just the port.

    But unless that stuff is incredibly lacking in development, $5 a port means a $160 16 port switch. Figure tack on another $80-100 for the management layer and all of the stuff to support those ports. Maybe $160 for an 8 port, $260 for a 16 port. $340 for a 24 port and $700 for a 48 port. I think there would be a lot of buyers at those price points. Heck, I'd be knocking down the door for a 16 port 2.5GbE switch.

    5GbE and 10GbE would be really nice, but a >2x speed increase would be really swell right now. I don't suffer in silence though and I run 2x1GbE links from my server to my 24 port core switch and 2x1GbE links from my desktop to my core switch. However, the network layer is still generally the weak link in data transfers between machines, even with SMB Multichannel doing its magic. My RAID 0 2x3TB storage array in each machine is more than capable of exceeding the 235MB/sec hard limit of that link (9k jumbo frames enabled, TCP/IP and SMB protocol losses). Reviews I've seen of 2.5GbE seem to show it managing about 255-270MB/sec. A single 2.5GbE link would be a little more than the current performance of my 2x1GbE link.

    But why stop there, I have the wiring, might as well do a 2x2.5GbE link and somewhat more than double my current performance. I am sure some day that'll feel like a limitation also, but it is way faster than my HDD array can handle and roughly as fast as the SSD boot drive in my server or the boot/app drive in my desktop can manage being limited to SATA3 interface. I know NVME SSDs would crush that link, but I am not too greedy. I don't need multiple GB/sec right now. ~500-550MB/sec link speed could probably make me pretty happy for a few years.

    Single 2.5GbE links for access points and router would prevent those from being bottle necks for 802.11ax equipped devices for some nice future proofing there. Hopefully I'll see laptops start having 2.5GbE ports also.

    It feels like we are on the cusp of 2.5GbE being the new standard "everything except your printer which is still stuck with fast Ethernet ports" has one.

    But SOHO/residential switches that are affordable and/or have sufficient ports seems to be the real bottleneck right now. Only a few companies are making them and a lot of times they are some weird thing where it has like 4x 2.5GbE ports, 2x5GbE ports, 1x10GbE port and 2-4x1GbE ports. I mean, I can see how maybe that would be useful in a test lab or small video development shop that needs to network work a couple/few workstations at higher speeds to one 10GbE NAS. But I still haven't seen any standard 8, 16, 24 or 48 2.5GbE switches (or 5GbE, but let's start somewhere with 2.5GbE switches). Heck, I'd even be okay with like a 24 port switch with 8 2.5GbE and 16 1GbE ports.
  • TheinsanegamerN - Friday, February 28, 2020 - link

    Tell me about it. 2.5G should be everywhere right now. It cant cost that much more over 1G controllers if 2.5G prces are that low.

    I went looking for 2.5G switches, now that the PCIe NICs are down to around $35. Cheapest switch I could find was over $200. That's rediculous. Buffalow makes a sub $200 model with 5x2.5G ports, but only in japan.
  • tygrus - Thursday, February 27, 2020 - link

    Need more Wireless routers with 2.5G or better physical ports.
    How about a combo switch combining a mixture of 3 port types:
    4x 1/2.5G copper
    2x 1/2.5/5G copper
    2x upto 10G (SFP+)

    ..or..

    8x 1/2.5G copper
    4x 1/2.5/5G copper
    2x upto 10G (SFP+)
  • TheinsanegamerN - Friday, February 28, 2020 - link

    I really dont see the point of 5G, i cant find a 5G ethernet adapter anywhere outside of a few poorly reviewed usb options.

Log in

Don't have an account? Sign up now