Testing Methodology

If you've been keeping up with our case reviews, our testing methodology for the fans here is going to seem relatively similar in some ways. Our test system may seem a bit unusual in more than a few ways, but stick with me and I'll explain why I put it together and tested it the way I did.

The processor, with its healthy voltage boost and overclock, throws a pretty substantial amount of heat at our cooling system. Testing with an i7-2700K at stock speeds would defeat the purpose; Intel's own stock cooler can handle that, we want to "separate the men from the boys" so to speak.

Fan and Radiator Testing Configuration
CPU Intel Core i7-2700K overclocked to 4.4GHz @ 1.4V
Motherboard Zotac Z77-ITX WiFi
Graphics Intel HD 3000 IGP
Memory 2x4GB Crucial Ballistix Sport Low Profile DDR3-1600
Drives Kingston SSDNow V+ 100 64GB SSD
Power Supply Rosewill Hive 650W 80 Plus Bronze Modular
Enclosure BitFenix Shinobi XL Window

I needed a case that could produce adequate airflow, handle all of the different cooling systems without much trouble, and did not include any sound dampening features. You might be surprised at just how difficult that was to find, but BitFenix came to the rescue and sent over a Shinobi XL. BitFenix's enclosure didn't get the best review when I tested it, but it's actually ideal for this testbed. I removed every case fan but the front intake, which I ran at 5V to prevent it from affecting acoustics while still providing adequate airflow.

Since a dedicated GPU wasn't needed, one wasn't used. This prevents a graphics card from generating additional heat or noise or deflecting airflow.

Thermal and acoustic test cycles were done the same way as our case reviews. First, the system is left powered and idle for fifteen minutes. At this point the sound level is tested, room ambient temperature is recorded, and idle temperatures are recorded. Then eight threads of small FFTs in Prime95 are run for fifteen minutes, and load temperatures are recorded.

Each cooler was tested using its available presets; the PWM-controlled coolers were tested between 30% and 100% using motherboard control as well as at a constant 100%.

Thank You!

Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our roundup.

  • Thank you to iBuyPower for providing us with the Intel Core i7-2700K.
  • Thank you to Zotac for providing us with the Z77-ITX WiFi motherboard.
  • Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
  • Thank you to Crucial for providing us with the Ballistix Sport Low Profile DDR3.
  • Thank you to Rosewill for providing us with the Hive 650W 80 Plus Bronze PSU.
  • Thank you to BitFenix for providing us with the Shinobi XL Window enclosure.
Ease of Installation Performance Results
Comments Locked

63 Comments

View All Comments

  • andymcca - Monday, March 18, 2013 - link

    Glad to see the CM 212 EVO in the line up. I was guessing when I opened the article that it would be omitted in favor of more expensive models. Thanks for including it, as I think people overlook it purely based on price!

    I've been happily using a fanless 212 Plus for years in my low noise desktop and have been very pleased!
  • boe - Monday, March 25, 2013 - link

    Nice report. I was bumming the Scythe ones were not included as that is what I use 90% of the time.
  • bobbyto34 - Wednesday, March 27, 2013 - link

    For my Fractal Node 304 and intel DH77DF mini itx board, I was hoping that the Noctua L9i would be ok... it was not the case on the compatibility list of noctua.

    I finally found the thermalright AXP 100 that fitted the board. The only drawbacks :
    - you cannot install the backplate because of chips on the bottom of the motherboard. You only put the screws.
    - covers some ports (CPU PSU, hd audio, system fan). You have to install these cables before installing the cooler
    - really close to the pci express port

Log in

Don't have an account? Sign up now