Testing Results, Maximum Fan Speed

Our maximum speed testing is performed with both the fans and the pump of the kit powered via a 12V DC source. This input voltage should have the pump and fans matching the speed ratings of the manufacturer – however, the Rise Aurora fans were quite a bit slower than their 2500 RPM specification, spinning at 2420 RPM per our tachometer. Regardless, all three fans were consistent, which is what actually matters as it suggests a good quality control.

Average Thermal Resistance

Core Temperature, Constant Thermal Load (Max Fan Speed)

The thermal performance of the Alphacool Eisbaer Aurora 360 indicates that the cooler lands near the top of similar offerings, slightly bested only by the larger Arctic Cooling Freezer II 420. The average thermal resistance of 0.0697 °C/W just a tiny bit better than that of similarly sized and priced coolers, such as the Corsair H150i Elite and the Cougar Helor 360.

Fan Speed (12 Volts)

The three Rise Aurora fans that Alphacool supplies with the Eisbaer Aurora are powerful, giving the cooler an advantage on thermal performance but at the cost of acoustics. With all three fans running at their maximum speed, our dB(A) meter recorded 44.3 dB(A), one of the highest figures we have ever recorded while testing an AIO liquid cooler.

Noise level

Testing Results, Low Fan Speed

Using a PWM voltage regulator, we reduced the speed of the fans manually down to half their rated speed, which is 1250 RPM for the Rise Aurora 120 mm fans. The pump was also connected to the same power source, functioning properly with this supply voltage.

Average Thermal Resistance

Core Temperature, Constant Thermal Load (Low Fan Speed)

With an average thermal permittance of 0.0784 °C/W, the Alphacool Eisbaer Aurora 360 initially appears to be one of the best AIO liquid coolers that ever went through our labs, matching the performance of the largest AIO cooler, the Arctic Cooling Freezer II 420 and outpacing everything else. This excitement however is short-lived when one remembers that the Rise Aurora fans are quite a bit faster than what most of the competition currently offers.

Fan Speed (7 Volts)

The noise output of the Alphacool Eisbaer Aurora 360 under these operating conditions is 35.9 dB(A), a figure that is clearly audible. It would probably be comfortable for continuous use in many usage scenarios but it is not ideal for environments where the acoustics are vital, as it would create a continuous source of white noise. The pump itself is entirely silent, without any electromechanical noise coming out of it at any speed.

Noise level

Thermal Resistance VS Sound Pressure Level

During our thermal resistance vs. sound pressure level test, we maintain a steady 100W thermal load and assess the overall performance of the coolers by taking multiple temperature and sound pressure level readings within the operating range of the stock cooling fans. The result is a graph that depicts the absolute thermal resistance of the cooler in comparison to the noise generated. For both the sound pressure level and absolute thermal resistance readings, lower figures are better.

This graph reveals that the Alphacool Eisbaer Aurora 360 does outperform most of the competition, yet by a much smaller margin than our thermal testing originally anticipated. The high noise levels of the fans shift the line upwards, closing the gap of thermal performance per sound pressure level. The Corsair H150i Elite even manages to partially outpace the Eisbaer Aurora 360, offering the same thermal performance at lower noise levels.

Testing Methodology Final Words & Conclusion
Comments Locked

23 Comments

View All Comments

  • alufan - Monday, August 22, 2022 - link

    I started off many years ago with a Corsair AIO then gravitated to an Alphacool kit very similar to this about 3 years back which I expanded and played with until the pump reached its limit, am now on a full blown twin pump hardline loop with 2x 480s a couple of 360s and a 280 cooling GPU and CPU so these kits have a place for those who want to start along the path of custom loops however the performance is not really any better than your average AIO of a similar size.
  • dizzynosed - Tuesday, August 23, 2022 - link

    I stay with air cooling. Don't have the nerves to fiddle with more equipment and problems than necessary.
  • Tom Sunday - Thursday, August 25, 2022 - link

    Yes indeed a 2-year warranty is simply not acceptable and especially for so-called German engineering. It having me think twice in even considering this type of Aurora model. There has always been the fear (warranted or not) that AIO’s have an eventual leak-ability, are harder to stay with, and thus many continue in favoring simpler to ‘install and forget’ air-cooling. Besides AIO OEMs have been know to increase their profits by supplying cheap fans. I would also suggest that generally any ;expandable; AIO products present a relatively small market segment almost to a degree where its manufacturing challenges profitability.

Log in

Don't have an account? Sign up now