Aliens vs. Predator Benchmark

Aliens vs. Predator is a DirectX 11 science fiction first-person shooter video game, developed by Rebellion Developments.  Available as a standalone benchmark, on default settings the benchmark uses 1920x1080 with high AF settings.  Results are reported as the average frame rate across 4 runs.

AVP - One 5850

AVP - Two 5850

AVP - One 580

AVP - Two 580

AVP is seemingly a GPU limited benchmark all the way through, with no apparent difference between the processors until you get to the dual 580 usage scenario.  However, at 130 FPS, it is unlikely a difference will be spotted.

Dirt 3

Dirt 3 is a rallying video game and the third in the Dirt series of the Colin McRae Rally series, developed and published by Codemasters.  Using the in game benchmark, Dirt 3 is run at 1920x1080 with full graphical settings.  Results are reported as the average frame rate across 4 runs.

Dirt 3 - One 5850

Dirt 3 - Two 5850

Dirt 3 - One 580

Dirt 3 - Two 580

Dirt3 always ends up showing a big difference between boards, as it is all about how well the runs are and how often the motherboard decides to tell the GPU to use more or less cores, or implement turbo states. In this case, the FX-8150 tends to reign over the 1100T, but the choice of motherboard at high GPU rates will cause up to a 9 FPS difference.  The Sabertooth in this instance comes near the top.

Metro2033

Metro 2033 is a challenging DX11 benchmark that challenges every system that tries to run it at any high-end settings.  Developed by 4A Games and released in March 2010, we use the inbuilt DirectX 11 Frontline benchmark to test the hardware at 1920x1080 with full graphical settings.  Results are given as the average frame rate from 10 runs.

Metro2033 - One 5850

Metro2033 - Two 5850

Metro2033 - One 580

Metro2033 - Two 580

The most demanding benchmark in our suite this time round is Metro2033, requiring a lot of GPU grunt to give even a nice 60 FPS at 1920x1080.  The processor doesn't seem to matter much here, as all our results are within statistical variance.  Though the Sabertooth again comes rather near the top most of the time.

Computation Benchmarks Final Words (ASUS, Gigabyte)
Comments Locked

57 Comments

View All Comments

  • phys1cs - Thursday, April 5, 2012 - link

    Spamming affiliate links, I see.
  • R3MF - Friday, April 6, 2012 - link

    "The third generation FX processor, codename Steamroller, is still reported (not confirmed) to use AM3+, meaning that there are still quite a few years left in this platform when taking the AMD route."

    If this is true then i simply cannot believe that AMD will continue on socket AM3+ without a chipset that supports PCIe 3.0!

    Where, when, and what will the 1090FX chipset arrive?
  • SilthDraeth - Thursday, April 5, 2012 - link

    This seems to be an ok roundup of AMD boards.

    However, how do the latest Windows 7 tweaks increase the performance of the Bulldozer? Can we get a before and after benchmark based on Win 7 and or Win 8 (beta) optimizations?

    I was hoping we would get that information. Also, how does it compare to similarly priced Intel offerings?
  • IanCutress - Thursday, April 5, 2012 - link

    Thank you for your comment. I didn't perform comparisons as Anand did a comprehensive look at the scheduling updates here:

    http://www.anandtech.com/show/5448/the-bulldozer-s...

    (Also reviewing five boards and writing 20,000 words about them takes longer than you think!)

    If there are any motherboards you would like to see in the future (or particular tests), drop me an email (ian AT anandtech.com) and I will have a look. Obviously I can't take care of every little niche test that everyone wants, otherwise we'd only get one board a month out for review, but I'll do what I can!

    Ian
  • SilthDraeth - Thursday, April 5, 2012 - link

    Thank you for the link. That is what I wanted.
  • StevoLincolnite - Thursday, April 5, 2012 - link

    I noticed your Thuban was hitting 60'C+
    So I was just wondering if you took the Thubans thermal bug into account on those readings? On my old 1090T and 1045T I had to have a 13'c offset to get a correct thermal reading.
  • sumitlian - Saturday, August 4, 2012 - link

    Temperature related problem have long been rectified in C3 stepping of Denab CPUs and in Thuban as well. There is no fault in temperature sensor anymore in our CPUs.

    Only C2 rev. or earlier rev. AMD CPUs suffered from this issue.

    Download and Read:
    "Revision Guide for Family 10h CPU"
  • ExarKun333 - Thursday, April 5, 2012 - link

    More to life than gaming on your PC. If you read the article, you could see how terrible the non-gaming benchmarks are for 'only' a Intel 4 and 6-core vs the 8-core AMD. Fanboi much?
  • blazeoptimus - Thursday, April 5, 2012 - link

    I bought an MSI 990FX-GD80 board a couple of months ago and was looking for a review like this one at the time. I would have loved the info you brought up here and I hope it will help others looking into the available 990FX boards.

    I went with the MSI board since it seemed to hit a sweet spot on features, price (newegg was offering $20 off which put it to $169) and performance. I also went with a Zosma processor since it seemed to hit the price elbow and had the most unlocking potential. I've been very happy with the experience thus far. I've been able to unlock the 2 additional processors and have pushed the clock to 3600mhz (stock is 3k). My next push will be to see if I can hit the aggressive clocks listed in this article.

    Thanks again for the write up. I'm a long time reader and frequently use the information in these reviews to make hardware decisions.
  • Taft12 - Thursday, April 5, 2012 - link

    Very comprehensive, thank you Ian!

    Of course now that you've exhausted so much energy on this review, the 1090FX chipset is right around the corner alongside the 2nd gen FX CPUs.

    Such is life for a desktop hardware reviewer!

Log in

Don't have an account? Sign up now