ATI’s Crossfire: Best Overclocker on the Market?
by Wesley Fink on September 27, 2005 12:05 AM EST- Posted in
- CPUs
Test Setup
Tests used OCZ PC3200 Platinum Rev. 2, which uses Samsung TCCD chips. All memory ran at 2-2-2-7 timing in all benchmarks.
We tested with our standard NVIDIA 6800 Ultra to allow the best comparisons to benchmark results with other motherboards. Resolution in all benchmarks is 1280x1024x32 unless otherwise noted.
| Performance Test Configuration | |
| Processor(s): | AMD Athlon 64 4000+ (2.4GHz) Socket 939 |
| RAM: | 2 x 512MB OCZ PC3200 Platinum Rev. 2 |
| Hard Drive(s): | Seagate 120GB 7200 RPM SATA (8MB Buffer) |
| Video AGP & IDE Bus Master Drivers: | ATI Catalyst Platform 5.8 NVIDIA Platform 6.66 |
| Video Cards: | ATI X850XT PE NVIDIA 6800 Ultra |
| Video Drivers: | ATI Catalyst 5.8 (8.161) NVIDIA nForce 77.77 |
| Operating System(s): | Windows XP Professional SP2 Direct X 9.0c |
| Motherboards: | ATI Crossfire AMD Reference Board SiS 756 Reference Board ASRock 939Dual-SATA2 (ULi M1695/1567) Sapphire A9RX480 (ATI) Jetway 939GT4-SLI-G (nForce4) ULi AP9567A (M1695/M1567) DFI LANParty UT nF4 Ultra-D (nForce4) MSI K8N Neo4/SLI Platinum (nForce4) |
Tests used OCZ PC3200 Platinum Rev. 2, which uses Samsung TCCD chips. All memory ran at 2-2-2-7 timing in all benchmarks.
We tested with our standard NVIDIA 6800 Ultra to allow the best comparisons to benchmark results with other motherboards. Resolution in all benchmarks is 1280x1024x32 unless otherwise noted.
Facebook
Twitter
RSS
40 Comments
View All Comments
Starcraftfreak - Friday, September 30, 2005 - link
So you are saying, the Board supports the dividers for DDR500 also on a Revision C core? I can remember when you published an article explaining it's a new feature of Revision E. Please clarify.SLI - Wednesday, September 28, 2005 - link
Everything I have seen thus far on the ATI chipset points to the FSB dropping to DDR333 *IF* you populate all 4 DIMM slots (with DDR400 RAM) This was an issue at the CPU level with AMD Athalon on board memory controller (at first) but has been addressed with the newer steppings. VIA and Nvidia chipsets have support for DDR400 with all 4 slots populated. This is a very important aspect to me and it needs to be addressed.Wesley Fink - Wednesday, September 28, 2005 - link
It was addressed in tRAS and Memory Stress Tests in the review - p.5. We had no trouble with 4 dimms at DDR400, though we did have to drop to 2T with 4 dimms as we do on every other AMD chipset. This is more a function of the on-CPU memory controller.sxr7171 - Wednesday, September 28, 2005 - link
I don't get it. We switched to SATA to get worse performance? SATA performed worse than IDE in every single benchmark.Scarceas - Tuesday, September 27, 2005 - link
I'd like to know what happens when you try two 6800s in a crossfire motherboard...I'm also curious about what happens why you try crossfire graphics cards on an NF4 SLI motherboard...
Early on I heard rumors that the motherboard implementation would be similar between the two and that mixing motherboard/graphics manufacturers *might* be possible...
Now the hardware is showing up and no one has tried it?
vailr - Tuesday, September 27, 2005 - link
Check: page 11 "Ethernet Performance" has format errors:http://www.anandtech.com/cpuchipsets/showdoc.aspx?...">http://www.anandtech.com/cpuchipsets/showdoc.aspx?...
Copied & pasted:
It will almost always be <em>much</em> lower than what we have measured.<br /> <br /> </span> </div> <div class="adcontainer"></div> <table border="0" width="100%"> <tr> <td align="right" colspan="2"> <table border="0" cellpadding="0" cellspacing="0"> <tr> <td><strong><a href="showdoc.aspx?i=2542&p=12" class="smalllink">Audio
tanekaha - Wednesday, September 28, 2005 - link
Ethernet page has same problem as b4 hereI`m using firefox latest beta and the browser considers the page done after this line.
Ntttcpr - m 4,0,
I guess u use a template for these reviews I had exactly the same prob with ( and commented similarly ) with I think the asrock dual article.
I guess not many others are getting this prob but I`m glad 2 see some! else has a prob and not just me.
What browser are u using ?
Wesley have u tried 2 view the article with firefox beta ? or even firefox ?
Wesley Fink - Thursday, September 29, 2005 - link
Articles are created in a document engine by our Web Editor, from basic information layouts we send the Web Editor. The engine generates HTML code. We don't individually generate the code for articles. Any problems with viewing the pages should be emailed to our webmaster Jason.Clark@anandtech.comtanekaha - Thursday, September 29, 2005 - link
Thanks for the replies gentsI am not using any blockers or extentions .. apart from FF default pop up blocker.
I will mail jason with the facts (as I see them)
I`ll also send the info to the FF team
THX again
tanekaha
JarredWalton - Wednesday, September 28, 2005 - link
If you're using any extensions to block ads or other content, you might want to try disabling those. I've been using Firefox for over a year now, and I don't have any issues with the pages. (Some pages render improperly the first time and I need to hit refresh, but that's generally only on long pages, and it seems more of a FF bug than anything.)