Compulab fitlet-XA10-LAN Review: A Fanless AMD UCFF PC for Networking Applications
by Ganesh T S on April 19, 2016 8:00 AM EST- Posted in
- Systems
- Networking
- AMD
- Fanless
- Industrial PC
- Passive Cooling
- CompuLab
Performance Metrics - I
The CompuLab fitlet-XA10-LAN was evaluated using our standard test suite for low power desktops / industrial PCs. Not all benchmarks were processed on all the machines due to updates in our testing procedures. Therefore, the list of PCs in each graph might not be the same.
Futuremark PCMark 8
PCMark 8 provides various usage scenarios (home, creative and work) and offers ways to benchmark both baseline (CPU-only) as well as OpenCL accelerated (CPU + GPU) performance. We benchmarked select PCs for the OpenCL accelerated performance in all three usage scenarios. These scores are heavily influenced by the CPU in the system. It was very surprising to see that the AMD A10 Micro-6700T with unlocked TDP can easily outperform Bay Trail and Braswell-based passively cooled NUCs. In fact, only the much costlier and larger Logic Supply NUCs are able to perform better than the Compulab fitlet-XA10-LAN in the Futuremark benchmarks.
Miscellaneous Futuremark Benchmarks
3D Rendering - CINEBENCH R15
We have moved on from R11.5 to R15 for 3D rendering evaluation. CINEBENCH R15 provides three benchmark modes - OpenGL, single threaded and multi-threaded. Evaluation of select PCs in all three modes provided us the following results.
The results are similar to what one might expect based on the Futuremark benchmarks.
Facebook
Twitter
RSS
50 Comments
View All Comments
ingwe - Tuesday, April 19, 2016 - link
This may be a naive question, but would this work as an HTPC? I would love a fanless solution for that and this seems to offer decent performance.monstercameron - Tuesday, April 19, 2016 - link
h.264 8bit 1080p, it could work but dont expect super high bit rates to work.unproven - Tuesday, April 19, 2016 - link
The ancient Zbox Nano AQ01 with an A4-5000 runs my 1080 display flawlessly - never a decoding single while streaming, including every H265 file I've tried.Old low power cores lack in ST performance so interfaces don't always "snap", but this thing should have no troubles at all with FHD TV.
BurntMyBacon - Tuesday, April 19, 2016 - link
Performance-wise it could be used as an HTPC. That said, you'd be better off considering a different variation of the fitlet unless you have a pressing need for all the networking ports.Caveats: The fitlets I had got VERY hot. I found the same results over multiple units and more than one variation of the fitlet, so I don't believe it to be a one off issue. I put them on top of mesh shelving and ran a fan on them as they would discolor the surface of the shelve they sat on over time. They had shallow fins on the top, so I believe they were second revision. The new heatsink may fix this problem.
That all said, you'd probably be better off looking at some of the other offerings from the same company. My experience with the Intense-PC3 and Intense-PC4 have been very positive. They aren't as small as fitlets, but they are still smaller than many consumer grade routers and they don't have the heat issues.
BurntMyBacon - Tuesday, April 19, 2016 - link
Correction - I've had positive experiences with the Fit-PC3 and Fit-PC4. Haven't had the pleasure of using an Intense-PC.ct909 - Tuesday, April 19, 2016 - link
An Intel NUC might not be fanless, but I'm damned if I can ever hear it, and would be a much better HTPC. You could even consider an Intel compute-stick.at80eighty - Tuesday, April 19, 2016 - link
look at the Minix NEO U1 - fanless; 4k, 60fps, 10bit, HEVCraddude9 - Thursday, April 21, 2016 - link
I would look at a different model of the Fitlet for HTPPC purposes. They have a version with just one Ethernet port for $15 less and one with the slightly slower A4 Micro-6400T chip for $69 less. Both of those probably put out less heat so would be more suitable for HTPC applications.Compulab - Thursday, April 21, 2016 - link
6400T is indeed significantly lower cost than 6700T, but for a given workload the 6700T would be lower-power since for a given frequency it can run at lower core voltage.pekpetrolhead - Friday, April 22, 2016 - link
Youy might want to consider a Giada F300. Fanless (whole chassis is a heatsink), i5 - great unit allround.