Super Pi

To look at pure number crunching, Super Pi 1.5 was run in all memory test configurations. Super Pi is a very simple program as it merely calculates the value of Pi to a designated number of decimal positions. In this case we chose 2 Million places.

SuperPi 1.5 - 2.66GHz
Results in Seconds - Lower is Better
Memory 800 1066 1333 1520 (380x7)
Kingston DDR3-1333
KHX11000D3LLK2
46.27
5-4-3-10 1.75V
45.42
6-5-5-12 1.7V
45.22
7-7-6-15 1.7V
45.31
8-8-8-22 1.8V
Corsair DDR3-1066
CM3X1024-1066C7
46.89
6-6-6-15 1.5V
45.93
7-7-7-20 1.5V
45.77
9-9-9-25 1.5V
-
DDR2 - P35
Corsair Dominator
45.78
3-3-3-9 2.25V
45.20
4-4-3-11 2.3V
- -
DDR2 - P965 (10x266)
Corsair Dominator
46.05
3-3-3-9 2.25V
45.39
4-4-3-11 2.3V
- -

As predicted in the unbuffered memory tests, Super Pi is fastest on the DDR2 low latency platforms, with P35 at 800 3-3-3 and 1066 4-4-3 the fastest in the overlap speeds. The P65 running the same memory is close behind. Lower Latency DDR3 now has Kingston at almost the same level in Super Pi as the P965 in overlap speeds. DDR3-1333 and DDR3-1500+ exclusively belong to DDR3.

It is interesting that the Kingston DDR3-1375 nearly closes the gap with the fastest 3-3-3 DDR2 memory available. This early introduction of lower latency DDR3 clearly demonstrates you will not have to give up a thing with DDR3 in the overlap speeds and you will gain higher speeds as well. The only current roadblock to DDR3 is the high price of admission. When that drops to near parity with DDR2 the logical choice will be DDR3.

Overclocking

Overclocked Memory Performance
Benchmark Applications- 7x380 - 2.66GHz
DDR3-1520
8-8-8-22
8x380 - 3.04GHz
DDR3-1520
8-8-8-22
8x375 - 3.00GHz
DDR3-1500
7-7-7-15
Sandra (Buffered) Memory Bandwidth:
Higher is Better
7329 7462 7506
Sandra (UnBuffered) Memory Bandwidth:
Higher is Better
5172 5263 5390
Super Pi 1.5:
Time in Seconds - Lower is Better
45.31 40.40 40.70
Far Cry:
Frames Per Second - Higher is Better
107.46 117.82 118.60
Quake 4 - id Demo:
Frames Per Second - Higher is Better
116.0 123.5 124.2
Half Life 2 - Lost Coast:
Frames Per Second - Higher is Better
109.5 111.5 112.1

The highest overclock that could be reached with stability with Kingston DDR3-1375 was 1520 at 8-8-8-22 timings at 1.8V. While we managed to boot at speeds as high as 1552, the performance was not stable enough to consistently run our test suite. While voltages as high as 1.9V worked for a while with added memory fans, it did not remain stable. The highest stable voltage that worked long term with air cooling is 1.8V.

There is more to the overclocking performance of the Kingston than just the 1520 number, however. The memory is rated at 7-7-7-timings, which is fast for a memory rated at DDR3-1375. This memory managed to reach 1500 memory speed at 7-7-7-20 timings at 1.8V. While it did reach 20MHz higher with slower 8-8-8 timings, it simply is not worth the slower timings for the small gain in speed. For best performance consider the Kingston a 7-7-7 memory to 1500 speed and ignore the higher timings

It is a significant advantage with the P35 chipset motherboards that every Core 2 Duo and Core 2 Quad processor we tested on the P35 boards ran at 1333 speeds at the stock multiplier without the need to increase voltage. This is a significant, free, and pain-free overclock provided courtesy of the new 1333 bus speed option. This little side effect will make the P35 with DDR2 a favorite overclocker's board with current Intel Core 2 Duo and Core 2 Quad processors. A $189 E6420 can perform even better than an E6700 just by selecting a 1333 bus on P35 and leaving everything else at default. A $500 Q6600 can outperform the QX6700 with just a bus speed change.

Bandwidth and Memory Scaling Gaming
Comments Locked

42 Comments

View All Comments

  • goinginstyle - Thursday, May 24, 2007 - link

    How did you arrive at the 1520 DDR3 memory speed? FSB increase from 8x333 or a memory ratio change. Do you have any overclocked DDR2 memory scores on the P965? It would be interesting to compare overclocked DDR2 to DDR3.
  • Wesley Fink - Thursday, May 24, 2007 - link

    You can look back at the Corsair Dominator memory review where we ran benchmarks at the highest overclock we could achieve. THe review is at http://www.anandtech.com/memory/showdoc.aspx?i=291...">http://www.anandtech.com/memory/showdoc.aspx?i=291.... THere are also overclocked test scores that can be compared in any of our more recent DDR2 reviews
  • Wesley Fink - Thursday, May 24, 2007 - link

    From the 1333 memory setting we overclocked to 380x8, or 3.04GHz. At that OC, with a base 1333 memory setting, the memory speed is 1520.

    One reader pointed out that 7x380 is also 2.66, which is our test frequency at other speeds. That is correct and it is an intriguing idea to also run all benchmarks at the 380x7 speed. We'll consider for a comparison in an upcoming review.
  • goinginstyle - Thursday, May 24, 2007 - link

    quote:

    From the 1333 memory setting we overclocked to 380x8, or 3.04GHz. At that OC, with a base 1333 memory setting, the memory speed is 1520.


    So it is very possible that the improvements in scores came from the increase in cpu speed and not the memory or it is a combination of both? How close can you get to 1333 memory speed at 8x380 so we know how much improvement there is in cpu speed over the increase in memory speed.

    quote:

    One reader pointed out that 7x380 is also 2.66, which is our test frequency at other speeds. That is correct and it is an intriguing idea to also run all benchmarks at the 380x7 speed. We'll consider for a comparison in an upcoming review.


    That is what has been confusing to me. Why not run at 7x380 to keep the CPU at the same speed so we can see how much performance is gained in running the memory higher. The one flaw is the increase in FSB speed would alter the scores if the app responds to cpu throughput improvements. I would suppose that would be minimal in the game testing but it would throw off the sandra scores. Does high memory speeds at high latencies beat stock memory speeds at low latencies?

    The article yesterday mentioned 1t command rates. Did you try 1t to see what happened with the Kingston memory? You used to report Everest scores and I was wondering if those scores are available or maybe Memtest if you use it. I think it would be interesting to see latency numbers in the article.
  • Wesley Fink - Thursday, May 24, 2007 - link

    Our standard procedure has been to test to the highest available memory setting, in this case 1333, and then overclock as far as we can go using this base memory setting. It is just a fortunate accident that 1520 was top OC here (and it still wasn;t the fastest results - 1500 7-7-7 was faster)which is also 7x333 or the same 2.66 used in the other memory speed tests. It would not likely hit that exact number again in future DDR3 reviews.
  • yuchai - Thursday, May 24, 2007 - link

    the 1520 speed is probably achieved by a 380 x 7 = 2660 configuration, so processor speed remains constant while the RAM runs at 1520 speeds.

    That said I'm surprised at the big improvement from 1333 to 1520, especially compared to the relatively small difference between 1333 and 1066.
  • goinginstyle - Thursday, May 24, 2007 - link

    quote:

    the 1520 speed is probably achieved by a 380 x 7 = 2660 configuration, so processor speed remains constant while the RAM runs at 1520 speeds.


    If that is the case then how do we know how much the FSB increased the score or how much the memory affected the results. I still think it is important to show overclocked DDR2 if they are going to show overclocked DDR3.
  • Chunga29 - Thursday, May 24, 2007 - link

    I wish that you were correct, but looking at the tables at least on says "8x380" - page 4. So it's not apples to apples. The text never talks about how fast the 1520 RAM speed is, likely because that's partly due to a 14% CPU overclock.

    While we're at it, where are the numbers for P965 with 1333 FSB? We've seen overclocking results on P965 with bus speeds as high as 2000+, so don't give us any excuses about it not being possible. Using ratios, you can come somewhat close to DDR2-800 and DDR2-1066, and if you're throwing in overclocked DDR3 scores anyway.... At least let us see what DDR2 can achieve on P965 with a decent effort. Sure, it's out of official spec, but then DDR2-800 with 3-3-3 timings isn't JEDEC spec either.
  • Wesley Fink - Friday, May 25, 2007 - link

    The 7x380 and 8x380 results are in a comment below and will be added to the OC section in a table.

    As for the P965, it was not designed to run 1333 processors or DDR3 memory, so there is no 1333 CPU raio available or any memory ratio above 1066. While it is true you can run a 25% overclock at 1333 FSB, the memory is also overclocked 25% from whatever ratio you selected. Even if you OC and select to get close to 1333 you will be running different memory straps on the P35 and P65 which definitely impacts results. It is very difficult to fairly compare P965 to P35 at speeds above 1066.

    At 1333 FSB the DDR2 memory is OC'ed from the 1066 base to 1333, and we don't have a single stick of DDR2 that is stable at 1333. An 800 speed base on P965 at 1333 would be DDR2-1000, which should be compared to what on the P35? Try to select OC vlues on your P965 board to see what we are talking about here.

    You are correct that it is is not impossible to come up with something somewhat close in a P965 test, it is just everything on the P965 would be overclocked while P35 would be running in spec. We can always compare an overclcoked P965 to a spec part, but is that more like justification for a P965 purchase than a revealing comparison.

    We will likely run some more P965 tests just to answer questions here, but we will only be including overlap speeds, where comparisons can be fairly made, in future reviews. There are also a multitude of P965 OC results in reviews out there for those that are interested.
  • Zaitsev - Thursday, May 24, 2007 - link

    I noticed this as well. It just seems odd because the jump from 1066->1333 is 267MHz, while 1333->1520 is 187MHz. In Far Cry and Quake 4 that translated into 10.91 and 8 more frames per sec. respectively. Did I miss something in the article or can someone explain why a smaller increase in MHz yielded a larger improvement?

    Oh, I see now that the processor is overclocked.

Log in

Don't have an account? Sign up now