Today Xilinx is announcing an expansion to its Versal family, focused specifically on low power and edge devices. Xilinx Versal is the productization of a combination of many different processor technologies: programmable logic gates (FPGAs), Arm cores, fast memory, AI engines, programmable DSPs, hardened memory controllers, and IO – the benefits of all these technologies means that Versal can scale from the high end Premium (launched in 2020), and now down to edge-class devices, all built on TSMC’s 7nm processes. Xilinx’s new Versal AI Edge processors start at 6 W, all the way up to 75 W.

Going for the ACAP

A couple of years ago, Xilinx saw a change in its customer requirements – despite being an FPGA vendor, customers wanted something more akin to a regular processor, but with the flexibility with an FPGA. In 2018, the company introduced the concept of an ACAP, an Adaptive Computing Acceleration Platform that offered hardened compute, memory, and IO like a traditional processor, but also substantial programmable logic and acceleration engines from an FPGA. The first high-end ACAP processors, built on TSMC N7, were showcased in 2020 and featured large premium silicon, some with HBM, for high performance workloads.

So rather than having a design that was 100% FPGA, by transferring some of that die area to hardened logic like processor cores or memory, Xilinx’s ACAP design allows for a full range of dedicated standardized IP blocks at lower power and smaller die area, while still retaining a good portion of the silicon for FPGA allowing customers to deploy custom logic solutions. This has been important in the advancement of AI, as algorithms are evolving, new frameworks are taking shape, or different compute networks require different balances of resources. Having an FPGA on die, coupled with standard hardened IP, allows a single product install to last for many years as algorithms rebalance and get updated.

Xilinx Versal AI Edge: Next Generation

On that final point about having an installed product for a decade and having to update the algorithms, in no area is that more true than with traditional ‘edge’ devices. At the ‘edge’, we’re talking sensors, cameras, industrial systems, commercial systems – equipment that has to last over its long install lifetime with whatever hardware it has in it. There are edge systems today built on pre-2000 hardware, to give you a scope of this market. As a result, there is always a push to make edge equipment more malleable as needs and use cases change. This is what Xilinx is targeting with its new Versal AI Edge portfolio – the ability to continually update ‘smart’ functionality in equipment such as cameras, robotics, automation, medical, and other markets.

Xilinx’s traditional Versal device contains a number of scalar engines (Arm A72 cores for applications, Arm R5 core for real-time), intelligent engines (AI blocks, DSPs), adaptable engines (FPGA), and IO (PCIe, DDR, Ethernet, MIPI). For the biggest Versal products, these are large and powerful, facilitated by a programmable network on chip. For Versal’s AI Edge platform, there are two new features into the mix.

First is the use of Accelerator SRAM placed very close to the scalar engines. Rather than traditional caches, this is a dedicated configurable scratchpad with dense SRAM that the engines can access at low latency rather than traversing across the memory bus. Traditional caches use predictive algorithms to pull data from main memory, but if the programmer knows the workload, they can ensure that data needed at the most latency critical points can already be placed close to the processor before the predictors know what to do. This 4 MB block has a deterministic latency, enabling the real-time R5 to get involved as well, and offers 12.8 GB/s of bandwidth to the R5. It also has 35 GB/s bandwidth to the AI engines for data that needs to get processed in that direction.

The other update is in the AI Engines themselves. The original Xilinx Versal hardware enabled both types of machine learning: training and inference. These two workloads have different optimization points for compute and memory, and while it was important on the big chips to support both, these Edge processors will almost exclusively be used for inference. As a result, Xilinx has reconfigured the core, and is calling these new engines ‘AIE-ML’.

The simplest AIE-ML configuration, on the 6W processor, has 8 AIE-ML engines, while the largest has 304. What makes them different to the usual engines is by having double the local data cache per engine, additional memory tiles for global SRAM access, and native support for inference specific data types, such as INT4 and BF16. Beyond this, the multipliers are also doubled, enabling double INT8 performance.

The combination of these two features means that Xilinx is claiming 4x performance per watt against traditional GPU solutions (vs AGX Xavier), 10x the compute density (vs Zynq Ultrascale), and more adaptability as AI workloads change. Coupled to this will be additional validation with support for multiple security standards in many of the industrial verticals.

Through our briefing with Xilinx, there was one particular comment that stood out to me in light of the current global demand for semiconductors. It all boils down to one slide, where Xilinx compared its own current automotive solutions for Level 3 driving to its new solution.

In this situation, to enable Level 3 driving, the current solution uses three processors, totalling 1259 mm2 of silicon, and then beyond that memory for each processor and such. The new Versal AI Edge solution replaces all three Zynq FPGAs, reducing 3 processors down to 1, going down to 529 mm2 of silicon for the same power, but also with 4x the compute capabilities. Even if an automobile manufacturer doubled up for redundancy, the new solution is still less die area than the previous one.

This is going to be a key feature of processor solutions as we go forward – how much silicon is needed to actually get a platform to work. Less silicon usually means less cost and less strain on the semiconductor supply chain, enabling more units to be processed in a fixed amount of time. The trade-off is that large silicon might not yield as well, or it might not be the optimal configuration of process nodes for power (and cost in that regard), however if the industry is eventually limited on silicon throughput and packaging, it is a consideration worth taking into account.

However, as is usual in the land of FPGAs (or ACAPs), announcements happen earlier and progress moves a little slower. Xilinx’s announcement today corresponds only to the fact that documentation is available today, with sample silicon available in the first half of 2022. A full testing and evaluation kit is coming in the second half of 2022. Xilinx is suggesting that customers interested in the AI Edge platform can start prototyping today with the Versal AI ACAP VCK190 Eval Kit, and migrate.

Full specifications of the AI Edge processors are in the slide below. The new accelerator SRAM is on the first four processors, while AIE-ML is on all 2000-series parts. Xilinx has indicated that all AI Edge processors will be built on TSMC's N7+ process.

Related Reading




Comments Locked


View All Comments

  • flgt - Wednesday, June 9, 2021 - link

    Always a tough spot for FPGA based solutions. Xilinx is always looking for bigger markets but once they are that big it is almost always worth moving to an ASIC.
  • diediealldie - Wednesday, June 9, 2021 - link

    The problem they have is not related to performance. Even if FPGAs can provide whooping x70 performance boost(theoretically) compared to GPU, it's not useful if there's no supporting ecosystem.
    When you're using GPU for AI, you're not alone. But FPGA, you're alone. That's what Intel is struggling with OneAPI.
  • Fataliity - Thursday, June 10, 2021 - link

    Xilinx has developed a command-line Os interface, and has an app store, along with a motherboard built for it and a dev kit. For like $300, servethehome covered it recently.

    They are probably going to do this again for this product. The barebones of yesteryear FPGA's is diappearing. You can download license plate scanners, facial recognition, etc. and just code what you want it to do with that data.
  • flgt - Thursday, June 10, 2021 - link

    Hard to believe that’s going to get traction. It’s still a dev kit and still a toy no matter how you market it. If you need to do inference you’re going to have many options with hard accelerators that are going to have much better performance than an FPGA.

    You use an FPGA because you have an application that is specialized, so you’re still going to need developers specializing in HDL. Fundamental building blocks have been available in vendor IP libraries for years and it’s never changed the use case for an FPGA.
  • diediealldie - Thursday, June 10, 2021 - link

    So the question is 'who can help me' when the problem occurs. When you're working with NVIDIA solutions, you can go to NVIDIA dev home and ask questions. You are not alone.
    Developer community is one of the fundamental blocks of semiconductor in fact. Without it, you'll be blocked by every trivial matters and project will fail.
  • SarahKerrigan - Thursday, June 10, 2021 - link

    Or, you know, you just contact your FAE and they help you with what you need to do. Like every other embedded product.
  • Murloc - Saturday, June 12, 2021 - link

    those bits and pieces of software help but at the end of the day it's still you and an FPGA, a bunch of bugs, and a support forum with some useless bot-employees who will just post a link to the FAQ instead of reading your actual question.
  • maxc7777 - Thursday, June 10, 2021 - link

    By 2022, it will have zenlike 3D cache as well, go from 4MB on chip to 32MB on chip
  • boozed - Friday, June 11, 2021 - link

    Okay but how exactly does this solve the silicon shortage?
  • eva02langley - Friday, June 11, 2021 - link

    If you read the article, you would understand that XILINX Versal is using 3 time less silicon for providing a better solution for the auto industry.

    With AMD in the picture, you can bet that the future will implement a full ecosystem with their semiconductor product families.

Log in

Don't have an account? Sign up now