OCZ's Agility 2 Reviewed: The First SF-1200 with MP Firmwareby Anand Lal Shimpi on April 21, 2010 7:22 PM EST
While it happens a lot less now than a couple of years ago, I still see the question of why SSDs are worth it every now and then. Rather than give my usual answer, I put together a little graph to illustrate why SSDs are both necessary and incredibly important.
Along the x-axis we have different types of storage in a modern computer. They range from the smallest, fastest storage elements (cache) to main memory and ultimately at the other end of the spectrum we have mechanical storage (your hard drive). The blue portion of the graph indicates typical capacity of these storage structures (e.g. 1024KB L2, 1TB HDD, etc...). The further to the right you go, the larger the structure happens to be.
The red portion of the graph lists performance as a function of access latency. The further right you go, the slower the storage medium becomes.
This is a logarithmic scale so we can actually see what’s going on. While capacity transitions relatively smoothly as you move left to right, look at what happens to performance. The move from main memory to mechanical storage occurs comes with a steep performance falloff.
We could address this issue by increasing the amount of DRAM in a system. However, DRAM prices are still too high to justify sticking 32 - 64GB of memory in a desktop or notebook. And when we can finally afford that, the applications we'll want to run will just be that much bigger.
Another option would be to improve the performance of mechanical drives. But we’re bound by physics there. Spinning platters at more than 10,000 RPM proves to be power, sound and reliability prohibitive. The majority of hard drives still spin at 7200 RPM or less.
Instead, the obvious solution is to stick another level in the memory hierarchy. Just as AMD/Intel have almost fully embraced the idea of a Level 3 cache in their desktop/notebook processors, the storage industry has been working towards using NAND as an intermediary between DRAM and mechanical storage. Let’s look at the same graph if we stick a Solid State Drive (SSD) in there:
Not only have we smoothed out the capacity curve, but we’ve also addressed that sharp falloff in performance. Those of you who read our most recent VelociRaptor VR200M review will remember that we recommend a fast SSD for your OS/applications, and a large HDD for games, media and other large data storage. The role of the SSD in the memory hierarchy today is unfortunately user-managed. You have to manually decide what goes on your NAND vs. mechanical storage, but we’re going to see some solutions later this year that hope to make some of that decision for you.
Why does this matter? If left unchecked, sharp dropoffs in performance in the memory/storage hierarchy can result in poor performance scaling. If your CPU doubles in peak performance, but it has to wait for data the majority of the time, you’ll rarely realize that performance increase. In essence, the transistors that gave your CPU its performance boost will have been wasted die area and power.
Thankfully we tend to see new levels in the memory/storage hierarchy injected preemptively. We’re not yet at the point where all performance is bound by mass storage, but as applications like virtualization become even more prevalent the I/O bottleneck is only going to get worse.
Motivation for the Addiction
It’s this sharp falloff in performance between main memory and mass storage that makes SSDs so enticing. I’ve gone much deeper into how these things work already, so if you’re curious I’d suggest reading our SSD Relapse.
SSD performance is basically determined by three factors: 1) NAND, 2) firmware and 3) controller. The first point is obvious; SLC is faster (and more expensive) than MLC, but is limited to server use mostly. Firmware is very important to SSD performance. Much of how an SSD behaves is determined by the firmware. It handles all data mapping to flash, how to properly manage the data that’s written on the drive and ensures that the SSD is always operating as fast as possible. The controller is actually less important than you’d think. It’s really a combination of the firmware and controller that help determine whether or not an SSD is good.
For those of you who haven’t been paying attention, we basically have six major controller manufacturers competing today: Indilinx, Intel, Micron, Samsung, SandForce and Toshiba. Micron uses a Marvell controller, and Toshiba has partnered up with JMicron on some of its latest designs.
Of that list, the highest performing SSDs come from Indilinx, Intel, Micron and SandForce. Micron makes the only 6Gbps controller, while the rest are strictly 3Gbps. Intel is the only manufacturer on our shortlist that we’ve been covering for a while. The rest of the companies are relative newcomers to the high end SSD market. Micron just recently shipped its first competitive SSD, the RealSSD C300 as did SandForce.
We first met Indilinx a little over a year ago when OCZ introduced a brand new drive called the Vertex. While it didn’t wow us with its performance, OCZ’s Vertex seemed to have the beginnings of a decent alternative to Intel’s X25-M. Over time the Vertex and other Indilinx drives got better, eventually earning the title of Intel alternative. You wouldn’t get the same random IO performance, but you’d get better sequential performance and better pricing.
Several months later OCZ introduced another Indilinx based drive called Agility. Using the same Indilinx Barefoot controller as the Vertex, the only difference was Agility used 50nm Intel or 40nm Toshiba NAND. In some cases this resulted in lower performance than Vertex, while in others we actually saw it pull ahead.
OCZ released many other derivatives based on Indilinx’s controller. We saw the Vertex EX which used SLC NAND for enterprise customers, as well as the Agility EX. Eventually as more manufacturers started releasing Indilinx based drives, OCZ attempted to differentiate by releasing the Vertex Turbo. The Vertex Turbo used an OCZ exclusive version of the Indilinx firmware that ran the controller and external DRAM at a higher frequency.
Despite a close partnership with Indilinx, earlier this month OCZ announced that its next generation Vertex 2 and Agility 2 drives would not use Indilinx controllers. They’d instead be SandForce based.
Post Your CommentPlease log in or sign up to comment.
View All Comments
johnlewis - Wednesday, April 21, 2010 - linkThanks for another great article. I'm patiently waiting for a (decent) 512 GB SSD in my budget so I can just throw everything besides media files on it; 256 GB might work, if I wasn't so damn lazy. Plus, I'd rather have a half full 512 GB drive than a 90+% full 256 GB drive.
retnuh - Wednesday, April 21, 2010 - link90%+ full 256gb, I hear ya. I've been digging over as many SSD reviews as I can in the last couple days. I WANT to replace my 256gb 5400rpm in my notebook, but just can't quite squeeze everything into 200gb.
gadgetguy10 - Wednesday, April 21, 2010 - linkI am waiting until the price is at least down to $1 per gigabyte for a decent ssd. I figure I can get by with about 128gb of space.
retnuh - Thursday, April 22, 2010 - linkmy problem is the ~120gb of development VMs, I can't get rid of them, but since I'm in vmware all day a SSD would be heaven sent for general performance. I'm keeping things pretty slim at ~190gb out of 256gb, but that 200gb mark is just too tight. I'd buy a 300gb agility 2 today if it existed.
529th - Wednesday, April 21, 2010 - linkI thought the OWC controllers were discovered to have the SF 1200 controllers?
Also, can we get a review on the 50g Vertex LE that are selling at New Egg, Thanks
Anand Lal Shimpi - Wednesday, April 21, 2010 - linkThose numbers are from the older OWC Mercury which used a limited run of SF-1500. The newer drives going forward are SF-1200 based. I'll be phasing them out of our graphs as a result.
dmayes - Thursday, April 22, 2010 - linkWhen are we going to see benchmarks on the new intel driver that's faster than microsoft's driver and it supports trim with raid and we shouldn't go off of just prices MSRP but actual newegg prices and maybe even have a low to high # for example Intel X25-M Mainstream SSDSA2MH160G2R5 ($400 - $489). Also include the 80gb version specially since its around $215 - $225
Impulses - Thursday, April 22, 2010 - linkI agree on the prices... Street prices of OCZ's Indillix drives are much lower than that Corsair Nova for instance, since OCZ ALWAYS has $20-30 rebates going on their drives (and they're just cheaper to begin with)... OCZ's Nova equivalent, the Solid 2, is like $300 flat after MIR.
Intel's newer SATA drivers don't enable TRIM in RAID, just w/RAID... You can have a SSD w/TRIM support and two HDD in RAID on the same controller with said drivers (something you couldn't do before), but you still can't RAID two SSD and retain TRIM support. AFAIK they didn't dramatically alter performance either but if you've got a link to tests that say otherwise I'd love to see it... I haven't bothered to install them yet.
eaw999 - Thursday, April 22, 2010 - linkbut you do have to admit it is strange that imsm 8.9 was used for the testbed instead of irst 9.6. 8.9 doesn't support trim at all! one has to wonder how this might affect (or not) the benchmark scores.
dmayes - Thursday, April 22, 2010 - link"The SandForce SF-1200 controller used in the A-DATA S599 with Intel’s latest RST 9.6 drivers is the fastest 2.5 inch solid state drive for Windows users at this time. This combination is able to outperform every other drive we have tested to date in all around performance." Source tweaktown but they compared it to another 1200 drive instead of using the same ssd with both drivers. This is what intel says "Is there TRIM support for RAID configurations?
Intel® Rapid Storage Technology 9.6 supports TRIM in AHCI mode and in RAID mode for drives that are not part of a RAID volume.
A defect was filed to correct the information in the Help file that states that TRIM is supported on RAID volumes."